_________ MECHANICAL PROPERTIES OF P/F CONNECTING RODS (Done with A. Bhambri of Saturn Corporation at P/M '88, Orlando, Florida)
_________ FLAW DETECTION IN P/M PARTS VIA REAL TIME X-RAY ANALYSIS, EDDY CURRENTS, AND ELECTRICAL RESISTIVITY (Part of the '88 Seminar on Flaw Detection at P/M '88, Orlando, Florida)
____________ MECHANICAL PROPERTIES OF STEAM BLACKENED P/M PARTS (Steam blackening of P/M parts containing carbon and copper, at low to medium density, can cause their tensile properties to be depressed below the levels in MPIF Standard 35. Done with David Pease and James Collette)
____________ THROUGH HARDENING OF P/M MATERIALS (The MP-55 with 2% Cu and .8% C will harden in ordinary belt sintering furnaces, in sections 2" x 8" x .5" thick, (1000 grams) to meet the properties of the heat treated prealloyed steels in MPIF Standard 35.)
__________ METAL INJECTION MOLDING: THE INCUBATION IS OVER! (By January of 1988, automotive customers were coming to the MIM fabricators)
____________ METALLOGRAPHY AND PROPERTIES OF SINTERED STEELS (Information on metallographic polishing techniques, interpretation, and statistical measurement of local density.)
____________ POWDER METALLURGY MATERIALS (The metallographic techniques we published in Vol. 9 of the ASM Metals Handbook)
_________ A PERSPECTIVE ON THE MARKETS AND TECHNOLOGY FOR INJECTION MOLDED METAL POWDER AND CERAMIC PARTS (1JPM, 1986, VOL. 22 No.3, Who was doing what in injection molding.)
____________ PRESENT STATUS OF P/M INJECTION MOLDING, (MIM), - AN OVERVIEW (Markets, technology, and who was doing what, as of the May 1987 MPIF meeting in Dallas, TX)
____________ LIST OF ALL THE NORTH AMERICAN PRODUCERS OF P/M PARTS (The list we compile for our own use, over 225 companies, addressed, CEO's. telephones)
____________ THE CONTROVERSIAL FUTURE OF POWDER METALLURGY (As presented at the May 1987 Annual Powder Metallurgy Conference, Dallas, Texas)
____________ AN APPROACH TO NEAR FULL DENSITY P/M AUTOMOTIVE COMPONENTS - LIQUID PHASE SINTERING OF IRON GRAPHITE MATERIALS (SAE 1987 - Ideas on using iron graphite to form a liquid phase at about 2100/F, and to sinter to full density. Maybe someone could take these ideas and make it work!)
__________ MECHANICAL PROPERTIES AND MICROSTRUCTURES OF GAS PRESSURE QUENCHED P/M ALLOYS. (Some ordinary P/M materials will harden well, or partially, when sintered and gas pressure quenched in a Hayes furnace.)
___________ AN ASSESSMENT OF POWDER METALLURGY TODAY, AND ITS FUTURE POTENTIAL (A review for SAE in 1983. Still has many areas of current interest.)
____________ STATE OF THE ART IN NET SHAPE, PRESS AND SINTER PARTS, ASM meeting, 1988
____________ PREALLOYED MNS POWDERS FOR IMPROVED MACHINABILITY IN P/M PARTS, ASM MEETING, 1988
____________ NET SHAPE METAL INJECTION MOLDING - US APPLICATIONS & BUSINESS OVERVIEW, 10-13-88, MIMA conference - markets, sales, profiles of most MIM houses.
____________ FORMATION OF P/M ALLOY STEELS FROM CARBONYL IRON, -325 MESH WATER ATOMIZED IRON, MASTER ALLOYS AND ELEMENTAL POWDERS, JULY 1990, - how to make less expensive MIM feedstock!
____________ WEAR RESISTING HYPEREUTECTOID STEELS - we assisted Dr. Amedeo DeRege in this paper that shows that some hypereutectoid steels do not fall off rapidly in strength, and that the carbides provide extra wear resistance in the as-sintered condition.
____________ HOW HARMONIZATION OF INTERNATIONAL P/M STANDARDS WILL AFFECT YOUR BUSINESS -presented at the Fall Management Meeting of MPIF, 1991. A review of the European Community P/M standards, and an historical review of how the U.S. has participated in writing the present ISO powder metallurgy standards.
____________ CRACK DETECTION IN GREEN AND SINTERED P/M PARTS - 1992 Seminar at P/M '92.
____________ NONDESTRUCTIVE FLAW DETECTION AND DENSITY MEASUREMENTS IN POWDER METALLURGY PARTS (Paper with Dr. Duane Johnson, President of SE Systems)
____________ TRANSVERSE RUPTURE STRENGTH, DIMENSIONAL CHANGE AND TENSILE PROPERTIES OF SINTERED COMPACTS Seminar paper at P/M '92, reviews progress on these test methods.
___________ STEEL POWDERS FOR HIGH PERFORMANCE AUTO PARTS, SAE '94 0423 Feb '94. (For P/F con rods)
____________ PRESENT STATUS AND FUTURE PROSPECTS FOR MIM MARCH 2, 1994. E. Andreotti, L. Pease, A. Nyce
____________ COMPARISON OF P/M BASED RAPID PROTOTYPE/LASER SINTERING/DTM PROCESSES Presented at Metal Powder Industries Federation Fall Management Meeting, Oct. 15, 1996 Santa Fe, New Mexico
To submit your request for technical papers, please note the
papers you would like, and call us at 1-978-685-6027